Pallet Rack Protection Guards

FBS Group, Inc. designs and manufactures rack protection and guard products to fit your warehouse environment for the maximum rack protection available to keep warehouse rack safe and prevent damage by material handling equipment.

We manufacture Row End Guards – End of Aisle guards which have a formed entry guard to increase aisle clearance up to 3” over traditional round end guards. Our Round Nose and V-Nose Boot Style column protectors are available in the standard 4” high size or another option is they are attached to a column shield for more added protection. We also make Intermediate Column Protectors that keep column and beams safe from damage. Other products we offer are Entry Guide Rails, Door Guards, Guard Rails and floor mounted Bollards.

The incident shown to the right could have been avoided. This collapse was caused by a lack of knowledgeable warehouse rack inspections, over-looked, and under estimated pallet rack damage. Failure to address damaged and missing pallet rack components led to this tragedy. This tragedy could have been prevented by regular warehouse rack inspections and repair or replacement of damaged pallet rack components. Fortunately, no one was injured in the scenario.

Safety is an important consideration in any business environment. For years, addressing warehouse rack damage was a matter of replacement of rack components, especially the load-bearing columns. FBS Group, Inc. has broken new ground with a pallet rack repair system which eliminates the problem associated with replacement.

FBS Group, Inc. has versatile capabilities, what is custom to our competition is standard to us. There is no limited size, style, or off the shelf item. We manufacture all our products without the added custom made charges other companies might charge.

Under the FBS system, warehouse rack repairs are done with virtually all product in place. Using our unique patented jack and lifting system, the upright frame is supported, the damaged section is removed precisely, and a prefabricated pallet rack repair kit is installed. Our weldors are AWS certified.

FBS Group, Inc. offers the widest range of pallet rack protection in the industry. FBS Group, Inc. designs and manufactures their rack protection and guard products to fit your warehouse environment for the maximum rack protection available.

The following are a few examples of FBS rack protection. FBS makes a variety of pallet rack protection suited for every need. If a new condition or need arises we can provide a solution and design to meet it.

The FBS row end guards have a formed entry guard to increase aisle clearance up to 3” over traditional round end guards.

The FBS guard is 12” high, made with ½” plate steel welded to 4” x 6” x 3/8” angle. 48” row end guards have 5 ea. 7/8″ holes to accommodate 3 to 5 ea. ¾” anchors for the finest end of row protection available. Row end guards are powder coat painted in standard safety yellow. (4″ x 6″ x 1/2″ angle also available)

V-Nose Boot Style Column Protector
1 of 77 images

Bolt-On Intermediate Column Protector
2 of 77 images

Round Nose Column Protector
4 of 77 images

End of Aisle Column Protection
19 of 77 images

Entry Guide Rails Hot Dip Galvanized
34 of 77 images

Round Nose Boot Style Column Protector
40 of 77 images

Tall Round Nose Column Protector
46 of 77 images

Tall Floor Mounted V-Nose Column Protector
57 of 77 images

Servicing throughout United States

Experienced Workforce — Quality Products

FBS Group, Inc. has Installation Services available

Call us today to learn more (773) 229-8675